High quality Cisco CCDP 300-115 dumps pdf training materials and vce youtube demo free update. Get the best Cisco CCDP 300-115 dumps exam questions and answers free download from lead4pass. “Implementing Cisco IP Switched Networks” is the name of Cisco CCDP https://www.leads4pass.com/300-115.html exam dumps which covers all the knowledge points of the real Cisco exam. Prepare for Cisco 300-115 exam with latest Cisco CCDP 300-115 dumps pdf practice files and study guides, pass Cisco 300-115 exam test easily.

High quality Cisco 300-115 dumps pdf training materials: https://drive.google.com/open?id=0B_7qiYkH83VROUdnZWRYLTJta1E

High quality Cisco 300-105 dumps pdf training materials: https://drive.google.com/open?id=0B_7qiYkH83VRS3BsT2duT3pTSlU

Vendor: Cisco
Certifications: CCDP
Exam Name: Implementing Cisco IP Switched Networks
Exam Code: 300-115
Total Questions: 456 Q&As

QUESTION 1
Which two options are two results of using the command spanning-tree vlan 50 root primary within a spanning-tree network under global configuration? (Choose two.)
A. Spanning tree determines the priority of the current root for VLAN 50 and reduces the priority of the local switch to a lower value.
B. The priority value for VLAN 50 is set to 4094 on the root while the local switch priority is set to 32768.
C. The spanning-tree timers are reduced to improve the convergence time for VLAN 50.
D. All ports that are configured on the current switch with VLAN 50 transition to designated ports.
E. The switchport that is configured for VLAN 50 is the primary connection to the spanning-tree root switch.
Correct Answer: AD

QUESTION 2
Which two statements about SPAN source and destination ports during an active session are true? (Choose two.)
A. The source port can be only an Ethernet physical port.
B. The source port can be monitored in multiple SPAN sessions.
C. The destination port can be destination in multiple SPAN sessions.
D. The destination port does not participate in STP.
E. You can mix individual source ports and source VLANs within a single session.
Correct Answer: BD

QUESTION 3
300-115 dumps What is the default port security violation
A. log
B. shutdown
C. no change
D. error-disable
Correct Answer: B

QUESTION 4
RSPAN has been configured on a Cisco Catalyst switch; however, traffic is not being replicated to the remote switch. Which type of misconfiguration is a cause?
A. The RSPAN designated VLAN is missing the remote span command.
B. The local and remote RSPAN switches are configured using different session IDs.
C. The local RSPAN switch is replicating only Rx traffic to the remote switch.
D. The local switch is overloaded with the amount of sourced traffic that must be replicated to the remote switch.
Correct Answer: A

QUESTION 5
Refer to the exhibit.

Based on the debug output, which three statements about HSRP are true? (Choose Three)
A. The final active router is the router with IP address 172.16.11.111
B. The router with IP address 172.16.11.111 has preempt configured
C. The priority of the router with IP address 172.16.11.112 is preferred over the router with IP address 172.16.11.111
D. The IP address 172.16.11.115 is the virtual HSRP IP address
E. The router with IP address 172.16.11.112 has nonpreempt configured
F. The router with IP address 172.16.11.112 is using default HSRP priority.
Correct Answer: ABD

QUESTION 6
Question about trunk configuration
int faX/X
switchport trunk allowed vlan x,x,x,x
switchport mode trunk
exit
show vlan
VLAN Name Status Ports
— ——————–?—— ———————
1 default active Fa0/1, Fa0/3, Fa0/3, FaX/X
show interface trunk
(no output)
A. link is shutdown
B. interface needs no shutdown
C. other side is configured as access port
D. missing switchport command
Correct Answer: A

QUESTION 7
Ferris Plastics, Inc. is a medium sized company, with an enterprise network (access, distribution and core switches) that provides LAN connectivity from user PCs to corporate servers. The distribution switches are configured to use HSRP to provide a high availability solution.
DSW1 -primary device for VLAN 101 VLAN 102 and VLAN 105
DSW2 – primary device for VLAN 103 and VLAN 104
A failure of GigabitEthemet1/0/1 on primary device should cause the primary device to release its status as the primary device, unless GigabitEthernet1/0/1 on backup device has also failed. 300-115 dumps
Troubleshooting has identified several issues. Currently all interfaces are up. Using the running configurations and show commands, you have been asked to investigate and respond to the following question.

What is the priority value of the VLAN 105 HSRP group on DSW2?
A. 50
B. 100
C. 150
D. 200
Correct Answer: B

QUESTION 8
Your customer has asked you to come in and verify the operation of routers R1 and R2 which are configured to use HSRP. They have questions about how these two devices will perform in the event of a device failure.

What issue is causing Router R1 and R2 to both be displayed as the HSRP active router for group 2?
A. The HSRP group number mismatch
B. The HSRP group authentication is misconfigured
C. The HSRP Hello packets are blocked
D. The HSRP timers mismatch
E. The HSRP group priorities are different
Correct Answer: B

QUESTION 9
Which will identify the master switch in stack wise?
A. lower priority
B. higher priority
C. lower id
D. higher id
Correct Answer: B

QUESTION 10
When a Layer 2 EtherChannel is configured, which statement about placement of the IP address is true?
A. The IP address is placed on the highest numbered member port.
B. The IP address is placed on the port-channel logical interface.
C. The IP address is placed on the lowest numbered member port.
D. The IP address is assigned via DHCP only.
Correct Answer: B

QUESTION 11
Refer to the exhibit. Which two commands ensure that DSW1 becomes root bridge for VLAN 10 and 20? (Choose two)
A. spanning-tree mstp 1 priority 0
B. spanning-tree mst 1 root primary
C. spanning-tree mst vlan 10,20 priority root
D. spanning-tree mst 1 priority 4096
E. spanning-tree mst 1 priority 1
F. spanning-tree mstp vlan 10,20 root primary
Correct Answer: BD

QUESTION 12
An enterprise network has port security sticky enabled on all access ports. A network administrator moves a PC from one office desk to another. 300-115 dumps After the PC is moved, the network administrator clears the port security on the new network switch port connecting to the PC, but the port keeps going back into errdisabled mode. Which two factors are possible causes of this issue? (Choose two)
A. Port security sticky exists on the new network switch port
B. Port security sticky is disabled on the new network switch port
C. Port security must be disabled on all access ports
D. Port security is still enabled on the older network switch port
E. Port security sticky is still enabled on the older network switch port
Correct Answer: AE

Read more: https://www.leads4pass.com/300-115.html dumps exam practice questions and answers update free try, 100% success and guarantee to pass!

High quality Cisco CCDP 300-115 dumps vce youtube free demo: https://youtu.be/wyXFLuYtFpI